Before installing the leather tiles let them adapt to their
new habitat for 3-5 days.
When the tiles are at the final location make sure the
boxes are in a dry dust free area, out of direct contact with
Before installing the tiles, glue and screw 3/8” or ½” plywood
to the floor or the wall substrate.
Tiles have to be glued directly to the plywood substrate, once
the plywood substrate has been placed and the entire work site
well vacuumed and cleaned of any dust and dirt, apply the glue
in two application:
First application, apply the
glue to both the substrate and the back of the leather tiles.
Allow it to dry completely before the second application.
Second application, allow
the glue to dry completely on both surfaces, make sure that
you don’t have any glue left on the side of the tile. When
dry, you can lay the tile. *The tile should be laid to a line
as a ceramic tile.
We recommend to install the leather floor
only after all other site construction has been completed.
Leather tiles needs a specific contact cement otherwise they will not hold, the manufacturer that we suggest for
Leather Tile installation is "DAP WELDWOOD the Original Contact
*Please Note: This is a shortened version of our installation instructions only intended as a guide, please contact use for a detailed description of our Installation Instructions prior to any installation.